Register Plate

The kit comes complete with everything you need to cut to size & fix onsite.

The Kit Includes:

1 - Plate 1000mm x 400mm x 1.5mm

1 - Soot Door 8” x 8”

1 - Flue Plate 8” x 8” with 6” hole

1 - Flue Plate 8” x 8” with 5” hole

2 - 800mm Angle Sections

2 - 300mm Angle Sections

2 - 4.5” Cutting Discs

1 – 3.2mm Hss Drill Bit

20 – Self Tapping Screws

ALL POWDERCOATED BLACK

Register Plates should always be measured and fitting by a qualified person.

A set of 4 x Pre-Galvanised, ready to use Register Plates with 5" and 6" Holes, Sweep Hatch and Fixing Angles.

All of these Galvanised Steel kits are ready to use and include:

• Debris plate dimensions 1000 x 400 x 1.5mm,

• All plates are for use with both 5" and 6" holes,

• All plates have a 6" sweep hatch,

• 2 x 800mm Galvanised fixing angles,

• 2 x 300mm Galvanised fixing angles,

A register plate is designed to be installed above the stove, it seals off the base of the chimney to prevent debris from falling into the fireplace and the prevent heat loss through the chimney.
Register Plates should always be measured and fitting by a qualified person.

This is a powder coated black register plate.

These angles are 800mm in length x 40mm x 40mm x 1.5mm, powder coated in black.

These are sold in packs of 2

These angles are 300mm in length x 40mm x 40mm x 1.5mm, powder coated in black.

These are sold in packs of 2

This is a 8” square soot door, it is powder coated in black.

These are sold individually.

These black flue plates have a 6” diameter hole in the middle, the actual flue plate is 8” square, they are powder coated in black.

These are sold individually.

These black flue plates have a 5” diameter hole in the middle, the actual flue plate is 8” square, they are powder coated in black.

These are sold individually.