MAGNETIC GAS FIRE TRIM

Important! We strongly recommend reading the specification PDF below before ordering.

Traditionally gas fire trims are held on by magnets and have a small outside return or lip around the outside edge to cover the edge of the gas fire that its attached to.

Our Made to measure Outside Return Frames or Magnetic Gas Fire Trims are made in the traditional, double layered method. Starting with a mild steel backing plate then covered/wrapped with the finishing material i.e. Stainless steel/Brass/ Copper etc. The corners are mitred for achieve a smooth finish with no raw edges on show. The two layers of material together are approx.3-4mm in thickness. The outside edge on a gas fire trim is normally around 10mm but we can produce larger returns up to a maximum of 100mm. An outside return frame is normally attached with magnets.

Delivery approx. 2 weeks.

Please take care to read our specification documents before ordering.

Width of Fire WITHOUT Frame

Height of Fire WITHOUT Frame

INTERNAL Width of the Frame

INTERNAL Height of the Frame

FACE Size of the Frame

OUTSIDE Return of the Frame

FINISH

I understand the new frame will be very slightly bigger to accommodate material thickness?

Four sided?

Would you like a bevel?

Price: £0.00
price incl. vat, excl. delivery

Calculate

Specification
Ask Question

Magnetic Gas Fire Trims or Outside Return Frames (as they are called in the fireplace industry) can be produced with face size between 15mm to 200mm and outside returns between 10mm and 100mm (exceptions can be manufactured if you contact us). There is no inside return on these frames, just the thickness of the material which is 3-4mm.

Download Specification

Question

Allow us to publish your question to our website (anonymously)

MAGNETIC GAS FIRE TRIM

Item added to cart